helpInterchangeable Head Pre-Set Clicker Torque Wrench 20-150 Ft/LbPre-set torque wrenches are designed for use on production lines and other applications where a specific torque is required for repetitive operations. Torque limiting positive sensory "click" when pre-set torque is reached. Handle length proportioned to torque range of wrench for minimum use fatigue. Featuring a durable non-slip cushion grip.Tamper proof torque setting for production line use. Torque values can be calibrated in English or Metric settings. All parts are made of alloy steel for maximum life and calibration retention. Accuracy: ±3% in direct of calibraiton, from 20-100% of full scale. Meets or exceeds ASME B107.14M-1994, ISO 6789. Torque Range: 20-150 ft. lb. (Preset to an amount within this range. PLEASE SPECIFY PRESET AMOUNT WHEN ORDERING.) Drive Size: Y (Note: The 2nd letter in the part number, for the Interchangeable Drives, indicates drive size. The drive size must match with the torque wrench handle. Example: Wrench 50T-I has "J" drive. 1" open end wrench would be RJE-16.) Length: 19.5" Weight: 1.19 lbs.heart
helpInterchangeable Head Pre-Set Clicker Torque Wrench 20-150 Ft/LbPre-set torque wrenches are designed for use on production lines and other applications where a specific torque is required for repetitive operations. Torque limiting positive sensory "click" when pre-set torque is reached. Handle length proportioned to torque range of wrench for minimum use fatigue. Featuring a durable non-slip cushion grip.Tamper proof torque setting for production line use. Torque values can be calibrated in English or Metric settings. All parts are made of alloy steel for maximum life and calibration retention. Accuracy: ±3% in direct of calibraiton, from 20-100% of full scale. Meets or exceeds ASME B107.14M-1994, ISO 6789. Torque Range: 20-150 ft. lb. (Preset to an amount within this range. PLEASE SPECIFY PRESET AMOUNT WHEN ORDERING.) Drive Size: Y (Note: The 2nd letter in the part number, for the Interchangeable Drives, indicates drive size. The drive size must match with the torque wrench handle. Example: Wrench 50T-I has "J" drive. 1" open end wrench would be RJE-16.) Length: 19.5" Weight: 1.19 lbs.heart
helpInterchangeable Head Pre-Set "Clicker" Torque Wrench 0-75 Ft/LbNOTE: Please specify Pre-Set setting desired in Special Shipping Instructions field when placing your order.Pre-set torque wrenches are designed for use on production lines and other applications where a specific torque is required for repetitive operations. Torque limiting positive sensory "click" when re-set torque is reached. Handle length proportioned to torque range of wrench for minimum use fatigue. Tamper proof torque setting for production line use. Torque values can be calibrated in English or Metric settings. All parts are made of alloy steel for maximum life and calibration retention. Accuracy: This style of wrench meets or exceeds ANSI/ASME B107.14M-1994, ±4% right & ±6% left. Torque Range: 0-75 Ft/Lb (Preset to an amount within this range) Drive Size: J (Note: The 2nd letter in the part number, for the Interchangeable Drives, indicates drive size. The drive size must match with the torque wrench handle. Example: Wrench 50T-I has "J" drive. 1" open end wrench would be RJE-16.) No grip supplied with this model. Length: 11" Weight: 1.25 lbs.heart
helpInterchangeable Head Pre-Set "Clicker" Torque Wrench 0-75 Ft/LbNOTE: Please specify Pre-Set setting desired in Special Shipping Instructions field when placing your order.Pre-set torque wrenches are designed for use on production lines and other applications where a specific torque is required for repetitive operations. Torque limiting positive sensory "click" when re-set torque is reached. Handle length proportioned to torque range of wrench for minimum use fatigue. Tamper proof torque setting for production line use. Torque values can be calibrated in English or Metric settings. All parts are made of alloy steel for maximum life and calibration retention. Accuracy: This style of wrench meets or exceeds ANSI/ASME B107.14M-1994, ±4% right & ±6% left. Torque Range: 0-75 Ft/Lb (Preset to an amount within this range) Drive Size: J (Note: The 2nd letter in the part number, for the Interchangeable Drives, indicates drive size. The drive size must match with the torque wrench handle. Example: Wrench 50T-I has "J" drive. 1" open end wrench would be RJE-16.) No grip supplied with this model. Length: 11" Weight: 1.25 lbs.heart
helpCDI Torque Products 501ED 1/4" Electronic Dial Wrench FEATURES * Four units of measure: ft.lb., in.lb., Nm, and kg.cm. * Accuracy ± 1% of indicated value CW & CCW, from 20% to 100% of full scale * Three step LED visual signal system: YELLOW light = approaching target torque; GREEN light = target torque reached; RED light = over torque indicator * Audible tone when desired torque is reached * Alarm tone sounds if wrench is overtorqued * Ergonomically designed wrench body * Display can be turned 180 degrees to allow left hand usage * Battery cover designed to be aviation FOD proof * Holds "peak" torque reading for 10 seconds * Constructed of special Capron material for long life and durability * Resistant to the majority of chemicals used in industrial environments * Wrench can be hung on tool board * Bar graph displays orientation of torque application (left or right hand) * Uses standard 9 volt alkaline battery * N.I.S.T. traceable certificate of calibration included * Meets or exceeds ASME B107.28-2005 SPECIFICATIONS Drive: 1/4" In.Lb.: 5-50 Ft.Lb.: .42-4.17 Nm:5.6-5.65 Kg.Cm.: 57-57.61 Length: 11.5 in. (292 mm) Weight: 1.25 lbs. (.57 kgs) Discounts are available on large volume orders of CDI Torque Products. Please contact us for more information.heart
helpCDI Torque Products 501ED 1/4" Electronic Dial Wrench FEATURES * Four units of measure: ft.lb., in.lb., Nm, and kg.cm. * Accuracy ± 1% of indicated value CW & CCW, from 20% to 100% of full scale * Three step LED visual signal system: YELLOW light = approaching target torque; GREEN light = target torque reached; RED light = over torque indicator * Audible tone when desired torque is reached * Alarm tone sounds if wrench is overtorqued * Ergonomically designed wrench body * Display can be turned 180 degrees to allow left hand usage * Battery cover designed to be aviation FOD proof * Holds "peak" torque reading for 10 seconds * Constructed of special Capron material for long life and durability * Resistant to the majority of chemicals used in industrial environments * Wrench can be hung on tool board * Bar graph displays orientation of torque application (left or right hand) * Uses standard 9 volt alkaline battery * N.I.S.T. traceable certificate of calibration included * Meets or exceeds ASME B107.28-2005 SPECIFICATIONS Drive: 1/4" In.Lb.: 5-50 Ft.Lb.: .42-4.17 Nm:5.6-5.65 Kg.Cm.: 57-57.61 Length: 11.5 in. (292 mm) Weight: 1.25 lbs. (.57 kgs) Discounts are available on large volume orders of CDI Torque Products. Please contact us for more information.heart
helpCDI Torque Products 501ED 1/4" Electronic Dial Wrench FEATURES * Four units of measure: ft.lb., in.lb., Nm, and kg.cm. * Accuracy ± 1% of indicated value CW CCW, from 20% to 100% of full scale * Three step LED visual signal system: YELLOW light = approaching target torque; GREEN light = target torque reached; RED light = over torque indicator * Audible tone when desired torque is reached * Alarm tone sounds if wrench is overtorqued * Ergonomically designed wrench body * Display can be turned 1heart
helpCDI Torque Products 6002ED 3/8" Electronic Dial Wrench, 60-600 In.Lb. FEATURES * Four units of measure: ft.lb., in.lb., Nm, and kg.cm. * Accuracy ± 1% of indicated value CW & CCW, from 20% to 100% of full scale * Three step LED visual signal system: YELLOW light = approaching target torque; GREEN light = target torque reached; RED light = over torque indicator * Audible tone when desired torque is reached * Alarm tone sounds if wrench is overtorqued * Ergonomically designed wrench body * Display can be turned 180 degrees to allow left hand usage * Battery cover designed to be aviation FOD proof * Holds "peak" torque reading for 10 seconds * Constructed of special Capron material for long life and durability * Resistant to the majority of chemicals used in industrial environments * Wrench can be hung on tool board * Bar graph displays orientation of torque application (left or right hand) * Uses standard 9 volt alkaline battery * N.I.S.T. traceable certificate of calibration included * Meets or exceeds ASME B107.28-2005 SPECIFICATIONS Drive: 3/8" In.Lb.: 60-600 Ft.Lb.: 5-50 Nm: 6.79-67.79 Kg.Cm.: 28-280.03 Length: 14.5 in. (368 mm) Weight: 1.51 lbs. (0.68 kgs) Discounts are available on large volume orders of CDI Torque Products. Please contact us for more information.heart
helpCDI Torque Products 6002ED 3/8" Electronic Dial Wrench, 60-600 In.Lb. FEATURES * Four units of measure: ft.lb., in.lb., Nm, and kg.cm. * Accuracy ± 1% of indicated value CW & CCW, from 20% to 100% of full scale * Three step LED visual signal system: YELLOW light = approaching target torque; GREEN light = target torque reached; RED light = over torque indicator * Audible tone when desired torque is reached * Alarm tone sounds if wrench is overtorqued * Ergonomically designed wrench body * Display can be turned 180 degrees to allow left hand usage * Battery cover designed to be aviation FOD proof * Holds "peak" torque reading for 10 seconds * Constructed of special Capron material for long life and durability * Resistant to the majority of chemicals used in industrial environments * Wrench can be hung on tool board * Bar graph displays orientation of torque application (left or right hand) * Uses standard 9 volt alkaline battery * N.I.S.T. traceable certificate of calibration included * Meets or exceeds ASME B107.28-2005 SPECIFICATIONS Drive: 3/8" In.Lb.: 60-600 Ft.Lb.: 5-50 Nm: 6.79-67.79 Kg.Cm.: 28-280.03 Length: 14.5 in. (368 mm) Weight: 1.51 lbs. (0.68 kgs) Discounts are available on large volume orders of CDI Torque Products. Please contact us for more information.heart
helpCDI Torque Products 6002ED 3/8" Electronic Dial Wrench, 60-600 In.Lb. FEATURES * Four units of measure: ft.lb., in.lb., Nm, and kg.cm. * Accuracy ± 1% of indicated value CW CCW, from 20% to 100% of full scale * Three step LED visual signal system: YELLOW light = approaching target torque; GREEN light = target torque reached; RED light = over torque indicator * Audible tone when desired torque is reached * Alarm tone sounds if wrench is overtorqued * Ergonomically designed wrench body * Displayheart
helpTorque And Angle Wrench, Electronic, Drive Size 1/2 In, Head Type Flex, Torque Range 25 To 250 Ft-lb, Torque Range 300 To 3000 In Lbs, Torque Range 33.8 To 338 Nm Kg, Torque Range 345.57 To 3455.7 Kg Cm, Graduations 1 Ft Lbs, Graduations 1 In Lbs, Graduations 1 Nm, Graduations 1 Kg Cm, Overall Length 27 In, Cw Rotation, Accuracy +/-2% Of Torque Reading Cw @ 20-100% Of Full Scale, Power Source (2) Lithium, 4 Modes, Converts Ft-lbs, In-lbs, Nm, Kg Cm, Calibration Certificateheart
helpDial Torque Wrench, Electronic, Drive Size 3/8 In, Head Type Fixed, Torque Range 2.08 To 20.83 Ft-lb, Torque Range 25 To 250 In Lbs, Torque Range 2.82 To 28.25 Nm Kg, Torque Range 28.79 To 287.97 Kg Cm, Graduations 0.5 Ft Lbs, Graduations 0.5 In Lbs, Graduations 0.5 Nm, Graduations 0.5 Kg Cm, Overall Length 14 1/2 In, Cw/ccw Rotation, Accuracy +/-1% Of Torque Reading Cw/ccw @ 20-100 % Of Full Scale, Power Source 9v, 4 Modes, Converts Ft-lbs, In-lbs, Nm, Kg Cm, Calibration Certificateheart
helpDial Torque Wrench, Electronic, Drive Size 3/8 In, Head Type Fixed, Torque Range 5 To 50 Ft-lb, Torque Range 60 To 600 In Lbs, Torque Range 6.79 To 67.79 Nm Kg, Torque Range 69.11 To 691.14 Kg Cm, Graduations 1 Ft Lbs, Graduations 1 In Lbs, Graduations 1 Nm, Graduations 1 Kg Cm, Overall Length 14 1/2 In, Cw/ccw Rotation, Accuracy +/-1% Of Torque Reading Cw/ccw @ 20-100 % Of Full Scale, Power Source 9v, 4 Modes, Converts Ft-lbs, In-lbs, Nm, Kg Cm, Calibration Certificateheart
helpTorque range is 20 to 150 foot pounds; Dual scale, calibrated dual direction; Positive lock with spring loaded pull down lock ring; Fast, accurate and easy to set; Easy to read laser marked single scaleheart
helpTorque range is 30 to 250 foot pounds; Dual scale, calibrated dual direction; Positive lock with spring loaded pull down lock ring; Fast, accurate and easy to set; Easy to read laser marked single scaleheart
